25
BIOS SETUP
•
Head: Number of heads
•
Precomp: Write precompensation cylinder
•
Landing Zone: Landing zone
•
Sector: Number of sectors
•
Drive A/Drive B
Select the correct types of diskette drive(s) installed in the computer.
−
None: No diskette drive installed
−
360K, 5.25 in.: 5-1/4 inch standard drive; 360 kilobyte capacity
−
1.2M, 5.25 in.: 5-1/4 inch high-density drive; 1.2 megabyte capacity
−
720K, 3.5 in.: 3-1/2 inch double-sided drive; 720 kilobyte capacity
−
1.44M, 3.5 in.: 3-1/2 inch double-sided drive; 1.44 megabyte capacity
−
2.88M, 3.5 in.: 3-1/2 inch double-sided drive; 2.88 megabyte capacity
•
Floppy Mode 3 Support
Supports some particular Japanese floppy drives (3.5 inch drives with 1.2 MB capacity).
•
Video
Select the type of primary video subsystem in your computer. The BIOS will detect the
correct video type automatically. The BIOS supports a secondary video subsystem, but
do not select it in this Setup.
−
EGA/VGA: Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA,
SEGA, SVGA or PGA monitor adapters.
−
CGA 40: Color Graphics Adapter, powers up in 40-column mode.
−
CGA 80: Color Graphics Adapter, powers up in 80-column mode.
−
MONO: Monochrome adapter, including high resolution.
•
Halt On
During POST, the computer stops if the BIOS detects a hardware error. You can set the
BIOS to ignore certain errors during POST and continue the boot-up process. The
followings are the selections:
−
All Errors: If the BIOS detects any non-fatal errors, POST stops and prompts you
to take corrective action.
−
No Errors: POST does not stop for any error.
−
All, But Keyboard: If the BIOS detects any non-fatal errors except keyboard, POST
stops and prompts you to take corrective action.
TS-AKT4 Family
