17
Forward
Collision
Alert the driver when the vehicle is getting too close to the car
ahead. This function is activated when the driving speed exceeds
the value set ahead.
Disable (default) / 60 kmh ~ 150 kmh (40 mph~85 mph)
Speed Alarm
Alert the driver with warning beeps if the driving speed exceeds
the value set ahead.
Disable (default) / 60 kmh ~ 150 kmh ((40 mph ~ 85 mph)
Speed Unit
Set the measurement unit of speed.
km/h (default) / mph
Head-Up
Display
Display the current speed and safety alerts onscreen.
Disable (default) / Enable
Headlight
Reminder
When the DrivePro detects poor lighting conditions, the headlight
reminder will automatically activate.
Disable (default) / Enable
Driver Fatigue
Alert
Remind the driver of the need to rest after driving for a preset,
driver-determined period of time.
Disable (default) / 1 hour / 2 hours / 3 hours / 4 hours
Parking Mode
Determine if a continuous recording is necessary according to
motion detection after the car engine is switched off (this mode will
drain DrivePro’s battery).
Enable / Disable (default)
System
Icon
Feature
Function/Option
Display
Display both lenses or the front / rear lens only.
Front / Rear / Both (default)
Volume
Set the speaker volume level.
0~7 (0
Silent Mode)
G-Sensor
Adjust the sensitivity of the G-Sensor.
Disable / Low (default) / Medium / High
Delay Power
Off
Schedule the DrivePro to shut down at a certain time.
Disable / 10 secs (default) / 30 secs
