11
A warning will appear on the screen when the emergency recording is being activated.
G-Sensor Event Recording:
During video recording, the DrivePro will automatically activate
Emergency Recording mode when detecting a collision.
If the G-
Sensor sensitivity is set to “High”, even minor shocks will activate Emergency
Recording mode.
If the G-
Sensor sensitivity is set to “Low”, only significant shocks will activate Emergency
Recording mode.
G-Sensor sensitivity can be adjusted or disabled in the
Settings
menu.
Note:
The earliest emergency file saved will be overwritten by the latest emergency file recorded
once the 30% storage space is full.
4-3 Parking Mode Recording
After the car engine is switched off, the DrivePro can automatically enter Parking mode and record
footage when motion or collision is detected. Parking mode is disabled by default and can be
enabled in
Note:
After the car engine is switched off, enabling Parking mode will drain the DrivePro
’s built-in
battery.
During Parking mode, the LCD display will turn off; the LED indicator will be solid red on standby.
When a motion or collision of the vehicle is detected, the DrivePro will record a footage of about 15
seconds; the display will turn on and the LED will flash red. The display will turn off again if no more
motion/collision is detected in about 15 seconds. The DrivePro will resume Normal recording mode
when the engine is switched on again (connected to power).
Transcend
’s car lighter adapter does not supply power after the engine is switched off. If long-term
recording in Parking mode is required, please use an external power supply. Enter the Parking mode
manually by long pressing the
button during video recording. To power off the DrivePro, long
press the
button again.
