5.4 Command Format
Device Address (2 bits): When the device address is less than 10
bits, please add 0 in front of the address.
Operational command (2 bits):
GD: Get weight data;
GC: Get calibration information;
GP: Get equipment address information;
GV: Get software vision;
GS: Get TI-1500VC factory series No;
CC: Transmit Units;
CH: Enter/Exit Hold Mode;
CZ: set the system to display zero.
-17-
Hardware Vision Explain:
Show as follow figure. There is a hardware’s mark label paste near
the power terminal. So the different PCB board which marks
different sign can not be changed. Otherwise the TI-1500VC will be
destroyed. If the transmitter out of operate because of the
hardware error, please take it back to the factory, don’t repair it by
yourself.
-18-
Hardware Vision Label
