background image

LIMITED WARRANTY 

 

 

Seller warrants that the TC Series Digital Counting Scale line will conform to written specifications, 
drawings, and other descriptions made by the manufacturer, including any modifications thereof. The 
Seller warrants the goods against faulty workmanship and defective materials. If any goods fail to conform 
to these warranties, Seller will, as its sole and exclusive liability hereunder, repair or replace such goods if 
they are returned within the following warranty period: 

 

Twelve (12) months from date of shipment from manufacturer.

 

 
These warranties are made upon the following TERMS and CONDITIONS: 
 
This warranty is limited to the original equipment manufactured by TRANSCELL TECHNOLOGY, 
INC. Items not covered under this warranty are batteries and normal wear items like connectors, 
shrouds, front panels and fuses. 
For the first sixty (60) days from the date of installation, the warranty covers parts, on-site labor, 
and limited travel time and mileage. (3 hrs/150 miles maximum per occurrence). After sixty (60) 
days, the warranty covers the cost of replacement parts only. However, at the discretion and prior 
approval of TRANSCELL, certain equipment may be returned , freight pre-paid, for repair, free of 
any parts or labor charges.   
 
TRANSCELL’s responsibility is confined to repair, replacement or credit of equipment of parts. 
The warranty does not extend coverage to labor, material, freight or service charges involved in 
removal, shipping or reinstallation of equipment or parts. 
 
CONDITIONS WHICH VOID LIMITED WARRANTY: 
This warranty shall not apply to equipment which: 
 
A. Examination of such goods discloses that the nonconformity exists and was caused by 

accident, misuse, neglect, alteration, improper installation improper or unauthorized repair, 
improper testing, or an act of GOD including lightning and such goods have not been 
modified, altered, or changed by any person other than the Seller or its duly authorized repair 
agents. 

 
Transcell Technology, Inc. will have a reasonable time to repair or replace such goods. 
 
THESE WARRANTIES EXCLUDE ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL 
OR WRITTEN, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE. SELLER WILL NOT IN ANY EVENT BE LIABLE 
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. 
 
IN ACCEPTING THIS WARRANTY, THE PURCHASER OR BUYER AGREES TO WAIVE ANY 
AND ALL OTHER CLAIMS FOR RIGHT TO WARRANTY FROM TRANSCELL TECHNOLOGY, 
INC. SHOULD THE SELLER BE OTHER THAN TRANSCELL TECHNOLOGY, INC., THE 
BUYER AGREES TO LOOK ONLY TO THE SELLER FOR WARRANTY CLAIM OR CLAIMS. 
 
No terms, conditions, understanding, or agreements purporting to modify the terms of this 
warranty shall have any legal effect unless made in writing and signed by a corporate officer of 
the Seller. 
 

 

 

Page 34 

 

Содержание TC-2005 Series



































Отзывы: