5.5.4 Check Time (A9)
Use this menu to verify the current time set on the scale.
1. While in the User Menu mode, scroll to "
A 9
", then scroll down once using
the TARE key to enter the check time menu.
2. The display will momentarily show "
t - - -
", followed by the current time in
military (24-hr) format.
3. After checking the time, press the SAMPLE key to exit and revert back up to
A9.
5.5.5 Set Date (A10)
Your scale will also keep track of the current date for you, which can then be
printed on the print ticket. Use this procedure to set the current date, which must
be set in mm/dd/yy format. For example, for January 7, 1998, you would enter
01.07.98. For November 30, 1998 you would enter 11.30.98.
1. While in the User Menu mode, scroll to "
A 10
", then scroll down once using
the TARE key to enter the date entry menu.
2. The display will momentarily show "
SET D
", followed by a value with one
flashing digit. This value will be the current date in mm/dd/yy format.
3. Use the four directional keys (shown in Figure 5-1 above) to adjust the
displayed value to the actual date value. Increase the flashing digit by
pressing the ZERO key. Decrease the flashing digit by pressing the TARE
key. Pressing the PRINT key or the UNIT key will change the position of the
flashing digit.
4.
After setting the exact value, press the SAMPLE key to save the date value.
The display will show "
SET
" momentarily, then revert back up to A10.
5.5.6 Check Date (A11)
Use this menu to verify the current date set on the scale.
1. While in the User Menu mode, scroll to "
A 11
", then scroll down once using
the TARE key to enter the check date menu.
2. The display will momentarily show "
d- - -
", followed by the current date in
mm/dd/yy format.
3. After checking the date, press the SAMPLE key to exit and revert back up to
A11.
Page 25
