Transcell Technology Neptune-6500 Series, Руководство по эксплуатации

Страница: 5 / 31

Neptune 6500
5
CHAPTER 1: INTRODUCTION TO THE TRANSCELL NEPTUNE 6500 SERIES CHECK-
WEIGHER
The Transcell Model NEPTUNE 6500 Series Checkweigher is an easy to use high speed, wash
down, stainless steel bench scale. The main function of the NEPTUNE 6500 is to compare
programmed weight readings to pre-set tolerance limits that define an ACCEPTABLE range. If
the current weight reading is within an ACCEPTABLE weight range the green TARGET LED
’
s
light. If the current weight reading is less then the ACCEPTABLE range the amber UNDER LED
’
s
light. If the current weight reading is greater then the ACCEPTABLE range the red OVER LED
’
s
light.
The NEPTUNE 6500 features a full numeric keyboard, storage for up to 100 individual
OVER/UNDER/TARGET/TARE values with an easy link to individual ID recall. The NEPTUNE
6500 also features a simple programmable print format. Utilizing 3-5volt TTL outputs you can
readily send out check weight results to a PC or control other external devices. The NEPTUNE
6500 is available in two platform sizes and four avoirdupois weight capacities.
If you are an installer, the scale
’
s installation and wiring instructions are found in Appendix D. The
scale contains two main setup menus: Front panel access is available for simple calibration and
configuration. Prior to installing the scale, please read this manual carefully and completely. Store
the manual in a safe and convenient place so it will be available if you have questions concerning
the setup and operation of the scale.
FIGURE 1-1: Front Panel
MODEL CAPACITY /
GRADUATION
MODEL CAPACITY /
GRADUATION
NEPTUNE 6500-5 5lb (2.5kg) 12
”
W x 12" L NEPTUNE 6500-30 30lb (15kg) 18
”
W x 18
”
L
NEPTUNE 6500-10 10lb (5kg) 12"W x 12" L NEPTUNE 6500-50A 50lb (25kg) 18
”
W x 18
”
L