Transcell Technology Neptune-6500 Series, Руководство по эксплуатации

Страница: 29 / 31

Neptune 6500
29
B.1.3 SIMPLEX MODE
The Simplex Mode provides a continuous serial transmission mode and is selected
by setting A3 to
“
C
”
and A16 to
“
PC
”
. The Continuous mode is used to interface to
computers, scoreboards, and other remote devices requiring constant data
updating. The transmission occurs at the end of each display update. Figure B-5
shows the serial data format for Continuous Mode.
<STX> <POL> xxxxx.xx <L/K> <G/N> <STAT> <CR> <LF>
Polarity:
<SP> = Positive
"
–
" = Negative
Weight Data
Units:
L = pound
K = kilogram
Gross/Net:
G = Gross
N = Net
Start
Transmission Carriage
Return
Line
Feed
Status:
<SP> = Valid
M = Motion
O = Over/under range
P = pieces
C = custom units
* Available on TI-500E and TI-500E-SS only
PCS = pieces*
FIGURE B-5. Consolidated Controls Continuous Mode