TransAct Ithaca 90PLUS Series Скачать руководство пользователя страница 30

Страница: 30 / 172

Control Codes

PcOS Series 90PLUS

Programmer's Guide

Page 18

Rev Q

11/07/05

4.1.1

Standard Emulation

The standard control codes for the Series 90PLUS Printer are extensions and subsets of the IBM emulation

provided on other PcOS products. In some cases, an application designed for a Series 50 Printer with IBM

code sets will function with a Series 90PLUS Printer. There are, however, significant differences in the

operation of the Series 90PLUS Printer that may impact existing applications.

4.1.2

EPOS Emulation

ESC/POS

is referred to here as EPOS. The Series 90PLUS Printer supports an EPOS emulation with

extensions. The emulation is designed to allow the Series 90PLUS Printer to be used with Seiko Epson

printer applications. It is intended that the standard emulation be used for new applications. Not all features

of the Series 90PLUS Printer are supported by EPOS.

This guide will include the EPOS code equivalent for features of the Series 90PLUS Printer that are

supported by EPOS. When EPOS commands are significantly different from the standard emulation, an

independent EPOS description is provided.

4.1.3

IPCL Codes

Ithaca Printer Control Language (IPCL) codes are designed to control a printer without using control

characters, i.e., characters less than 20H. Only the standard emulation supports IPCL. Not all commands are

supported by IPCL codes. For the commands that are supported, the IPCL code is listed.

In rare cases, an IPCL code will interfere with the text that is to be printed. The IPCL translator can be

disabled with an [ESC] y <4> command.

4.2

Application Development

To aid in application development, there are several sections in this guide that are designed to help the

programmer understand the Series 90PLUS Printer. The first is a detailed description of each of the commands.

The second section is an explanation of how the printer works. It explains the internal print buffer, the

communication link, and how the host computer and printer interact. The third is a description on how to use the

CFG90 program to help develop applications.

4.3

Tables and Charts

Throughout this guide, there are charts and tables that list commands and features. In most cases, these charts

cross-reference the page that describes the command. Commands are grouped by function and can at times be

hard to find. To minimize the time it takes to find commands, there are two code summary charts in the

following section, one ordered by code and one by function.

ESC/POS is a registered trademark of the Seiko Epson Corporation.

Содержание Ithaca 90PLUS Series













































































































































































Результаты поиска

Содержание Ithaca 90PLUS Series

Отзывы:

Похожие инструкции для Ithaca 90PLUS Series

Бренды по названию

Популярные бренды

TransAct Ithaca 90PLUS Series, Руководство программиста

Результаты поиска

Содержание Ithaca 90PLUS Series

Отзывы:

Похожие инструкции для Ithaca 90PLUS Series

Бренды по названию

Популярные бренды