TransAct Ithaca 90PLUS Series Скачать руководство пользователя страница 156

Страница: 156 / 172

Communications

PcOS Series 90PLUS

Programmer's Guide

Serial Port

Page 144

Rev Q

11/07/05

8.3.7

Serial Port Inquire

The serial port inquire is more straightforward than parallel mode. The serial acknowledged (ACK) or not

acknowledged (NAK) responses follow a uniform format, the ACK or NAK is always followed by the

command ID that requested it. This makes the design of the host application easier because the response can

be identified and always follows the same format.

Figure 31 Inquire flow

The host sends an [ENQ] <id> (form sensor status) request to the printer. The printer responds with an

[ACK] <id> indicating that the request was identified, and the status is true.

Inquire commands affect the printer’s performance. Printer communications are a high priority. Inquire

commands take processing time away from print tasks. It is possible to ask for so much status that the

printer slows down.

In serial mode, it is important that the response to an inquire command be received by the host before

another command is issued. When an inquire command is received by the printer, it is buffered in a high-

speed processing queue. When the printer has time, it empties the queue and processes the inquires. The

printer will respond to the command as soon as the second byte of the command is taken from the high

speed buffer. If the host is looking for a form to be inserted, it should not send status requests as fast as it

can. The host will get a response to all of them. If the host did not wait for a response to each, there would

be unnecessary responses.

In IEEE 1284 mode, inquiry responses are placed in an IEEE 1284 transmit queue. When the IEEE 1284

reverse channel is open, the responses are returned to the host. It is important that after each request the

reverse channel be opened. Inquire responses will remain in the queue until read. If the [ENQ] <9>

command is sent to the printer, the IEEE 1284 buffer will be cleared, and only the response to the [ENQ]

<9> will remain.

The host sends an

inquire to the printer

asking for the form

sensor status.

The printer receives the

request and

preprocesses it.

The printer responds

with an [ACK] <id> or

[NAK] <id> indicating

the form sensor status.

The host receives the

response and decodes

it.

Содержание Ithaca 90PLUS Series













































































































































































Результаты поиска

Содержание Ithaca 90PLUS Series

Отзывы:

Похожие инструкции для Ithaca 90PLUS Series

Бренды по названию

Популярные бренды

TransAct Ithaca 90PLUS Series, Руководство программиста

Результаты поиска

Содержание Ithaca 90PLUS Series

Отзывы:

Похожие инструкции для Ithaca 90PLUS Series

Бренды по названию

Популярные бренды