TransAct Ithaca 90PLUS Series Скачать руководство пользователя страница 13

Страница: 13 / 172

Programmer's Guide

PcOS Series 90PLUS

Overview

11/07/05

Rev Q

Page 1

Overview of the Series 90PLUS Printer

1.1

Warranty Information

1.1.1

Warranty Options

All TransAct Technologies Series 90PLUS printers come with a standard 24-month warranty covering both

parts and labor. An optional warranty, covering both parts and labor for an additional 12 months, may be

purchased separately.

For more information concerning the warranty options, please contact your dealer or the Sales Department

at TransAct Technologies. See “Contacting TransAct Technologies” on page 2.

1.1.2

Service Information

TransAct Technologies has a full service organization to meet your printer service and repair requirements.
If your printer needs service, please directly contact TransAct Technologies’ Technical Support Department

at (607) 257-8901 for a return authorization.
TransAct Technologies offers the following service programs to meet your needs:

•

Extend Warranty

•

Depot Repair

•

Maintenance Contract

1.2

What is in this book?

1.2.1

Who should read this book?

This book is intended for system engineers or integrators. It contains the information needed to integrate the

Series 90PLUS Printer with a point-of-sale terminal and to program the terminal to communicate with the

printer.

1.2.2

What does it cover?

The programmer's guide provides the following material:

•

Start-up information including diagnostics and fault conditions;

•

Command descriptions;

•

Character fonts;

•

Printer features;

•

Parallel and RS-232 interface information;

•

Communications and buffers; and

•

Command code reference tables.

Содержание Ithaca 90PLUS Series













































































































































































Результаты поиска

Содержание Ithaca 90PLUS Series

Отзывы:

Похожие инструкции для Ithaca 90PLUS Series

Бренды по названию

Популярные бренды

TransAct Ithaca 90PLUS Series, Руководство программиста

Результаты поиска

Содержание Ithaca 90PLUS Series

Отзывы:

Похожие инструкции для Ithaca 90PLUS Series

Бренды по названию

Популярные бренды