28
Trimble 2101 Approach Plus GPS Receiver
Trimble
Signal
Trimble 2101
Port 1
Trimble 2101
Port 2
SSD120-(XX)M 26 Pin Connector
RxD+
7
24
R or W
RxD
8
36
U or X
Ground
3 or 20
3 or 20
R or W
Configure the SSD120-(XX)M for Trimble/Garmin
protocol. See § 4.4.
Optional, configure the SSD120-(XX)M for 10'
resolution. See § 4.4.
Trimble 2101 Approach Plus GPS Receiver Software Configuration - Installation
Setup
Access the 2101 installation setup submenu and go to the SERIAL I/O SETUP. Select the
GPS serial port which is to receive the pressure altitude data,
SERIAL-1 IN
or
SERIAL-2 IN.
Set data format to
ENCODER
.
2101 I/O Approach Plus GPS Receiver
Trimble
Signal
Trimble 2101
I/O Serial
Port 1
Trimble 2101
I/O Serial Port
2
SSD120-(XX)M 26 Pin Connector
RxD+
J1-7
J1-24
R or W
RxD-
J1-8
J1-36
U or X
Ground
J1 - 3 or 20
J1 - 3 or 20
R or W
Configure the SSD120-(XX)M for Trimble/Garmin
Protocol. See § 4.4.
Optional, configure the SSD120-(XX)M for 10'
resolution. See § 4.4.
Содержание SSD120 M Series
