background image

 32-5035-16

User’s Information

Proper Maintenance

A clean filter saves money.

When the furnace circulates and filters the air in your 
home, dust and dirt particles build up on the filter. Ex-
cessive accumulation can block the airflow, forcing the 
unit to work harder to maintain desired temperatures.
And the harder your unit has to work, the more energy 
it uses. So you pay more any time your system is run-
ning with a dirty filter. 

CAUTION

!

Never operate your unit for either heating or cooling 

with filters removed.

 
Help ensure top efficiency by cleaning the filter once 
a month. Clean it twice a month during seasons when 
the unit runs more often.
You can clean the filter with a vacuum, OR you can 
wash it with a household detergent.  
 

NOTE:  Not all aftermarket filters can be washed with 
a household detergent.  See the instructions supplied 
by the aftermarket filter manufacturer.

How to remove your filter.

WARNING

!

ELECTRIC SHOCK HAZARD

DISCONNECT POWER TO UNIT BEFORE REMOVING 

BLOWER DOOR.  

FAILURE TO FOLLOW THIS WARNING 

COULD RESULT IN PROPERTY DAMAGE, PERSONAL 

INJURY OR DEATH.

 
Upflow furnaces use a high velocity type air filter 
which may be located within the furnace blower com-
partment in either a BOTTOM or SIDE (left or right) 
return air inlet. The filter may be secured with filter 
retaining brackets (as shown) or a filter rack.
To clean or replace filters, remove blower access door, 
slide the filter from the filter rack or remove the filter  
from the retaining brackets. After cleaning, replace the 
filter in the same manner, making sure that the filter 
is secured in place in both the front and back filter re-
taining brackets, if present, or that the filter is secure-
ly slid all the way into the filter rack. Replace blower 
access door.  A bottom return air inlet as shown fea-
tures a 17" x 25" x 1" filter in the 17-1/2" wide furnace; 
cabinets; a 20" x 25" x 1" filter in the 21" wide models; 
and a 24" x 25" x 1" filter in the 24-1/2" wide cabinet.

When replacing your furnace filters, always use a high 
velocity type which are the same size as originally sup-
plied. Filters are available from your dealer.
Where disposable filters are used, they must be a high 
velocity type which are the same size as originally sup-
plied.

AIR FILTERS
Clean the filter once a month for optimum perfor-
mance.  A monthly visual inspection of the furnace 
is also recommended.  See General Inspection 
on page 9, number 1.

NOTE:  Filters are NOT included with all Furnaces, how-

ever; the Furnace should never be run without a filter.

Your filter may or may not be framed.

Airflow

UPFLOW 

SIDE RETURN

Airflow

UPFLOW

BOTTOM RETURN

Airflow

Содержание XV95

















Отзывы: