Trane XV90i Скачать руководство пользователя страница 6

6  

32-5053-03

User’s Information

WHOLE HOUSE AIR CLEANER
MAINTENANCE

1.  For maximum effi ciency the COLLECTION CELL  
 

should be inspected and cleaned on a regular basis.

IMPORTANT:  A 30 to 90 day cleaning in-
terval is normal for the COLLECTION CELL 
and should be adjusted based upon unit 
run time and the home environment.

2.   The FIELD CHARGER must be removed and cleaned  
 

only by a qualifi ed service professional.

3.   The FIELD CHARGER must be cleaned at least once a  
 year.
4.  The FIELD CHARGER may require more frequent  
 

cleaning in homes with high indoor relative humidity  

 

(greater than 65% RH).

5.  Consult your service professional about cleaning  
 intervals.

WARNING

!

SAFETY HAZARD

TO PREVENT INJURY OR DEATH DUE TO CONTACT WITH 
MOVING  PARTS, TURN THE  POWER TO THE  FURNACE 
OFF BEFORE CLEANING THE WHOLE HOUSE AIR 
CLEANER COLLECTION CELL.

FAILURE TO FOLLOW THIS WARNING COULD RESULT IN 
PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.

WARNING

!

ELECTRICAL SHOCK HAZARD

RISK OF ELECTRIC SHOCK: THESE SERVICING 
INSTRUCTIONS ARE FOR USE BY QUALIFIED 
PERSONNEL ONLY.  TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT PERFORM ANY SERVICING OTHER 
THAN THAT CONTAINED IN THESE OPERATING 
INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. 

FAILURE TO FOLLOW THIS WARNING COULD RESULT IN 
PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.

WHOLE HOUSE AIR CLEANER

CAUTION

!

Never operate your unit for either heating or cooling with 
fi lters removed.

NOTE:  Whole House Electronic Air Cleaners are included 
with all of the Integrated Furnaces.

A clean fi lter saves money.

When the furnace circulates and fi lters the air in your 
home, dust and dirt particles build up on the fi lter. Exces-
sive accumulation can block the airfl ow, forcing the unit to 
work harder to maintain desired temperatures.

And the harder your unit has to work, the more energy it 
uses. So you pay more any time your system is running 
with a dirty fi lter.

CAUTION

!

High Voltage is present within the air cleaner for operation.  
Turn the power off and wait at least 15 seconds to allow 
voltage to discharge.

NOTE:  System Information

Before cleaning the coil or ducts in the furnace, remove 
the COLLECTION CELL and FIELD CHARGER from 
the air cleaner.  Chemicals used during the cleaning of 
the Furnace, or ductwork can damage the air cleaner 
components and degrade the performance of the air 
cleaner.

 

CLEANING THE COLLECTION CELL

1.  Turn the air conditioning system off at the Comfort Con-
trol and turn off service disconnect.
2.  Remove Blower Door.
3.  Slide 

COLLECTION CELL

 out of Furnace. 

CLEANING

The COLLECTION CELL may be cleaned either by vacu-
uming (recommended method) or by washing.

VACUUM CLEANING

Remove the COLLECTION CELL from the conditioned 
space before vacuuming.  Vacuum both sides of the 
COLLECTION CELL to clean.

WASHING

Use low-pressure water spray, such as a sink sprayer or 
garden hose to clean the COLLECTION CELL.  Some 
residue may require warm water to be removed.

•  Do NOT use soap or detergent in cleaning the 

COLLECTION CELL. 

• Do NOT immerse the COLLECTION CELL 

completely in water.

• Do NOT place the COLLECTION CELL into a 

dishwasher to clean.

• ALLOW THE COLLECTION CELL TO DRY 

THOROUGHLY BEFORE REINSTALLING.

Slightly tap the COLLECTION CELL to remove water re-
tained in the fi lter.  Allow the COLLECTION CELL to dry 
thoroughly before reinstalling.

Proper Maintenance

Содержание XV90i











Отзывы: