Trane UV-SVN02B-EN, Установка, эксплуатация и обслуживание, Страница: 8 / 52

Receiving and Handling
8 UV-SVN002-EN
The unit ventilator is packaged in clear
stretch wrap and protective to allow for
immediate visual inspection. Vertical
units are also shipped with a protective
cardboard cover to help prevent
scratching and other cosmetic blemish-
es during transport (Figure 3).
Horizontal units are shipped with card-
board blocking on all edges for protec-
tion during shipping (Figure 4).
NOTE:
Before unwrapping, make a
visual inspection of the unit for any
damage that may have occurred during
shipping. All orders are shipped FOB
(Free on Board) from the factory, there-
fore any claims must be made with the
delivering carrier.
Following visual inspection, carefully
begin the following procedures:
1. Carefully remove the stretch
wrap and the top cardboard
cover.
If end covers have been
ordered for vertical units, the
panel will already be mounted to
the unit.
2. Remove remaining cardboard
blocking
3. Remove the front (vertical) or
bottom (horizontal) access
panel with a 7/32” Allen wrench.
4. Verify nameplate sales order
number is correct.
5. Remove shipping bracket from
the lower rear corners of the unit
and shipping skid. Access to the
screws holding unit to the skid is
obtained inside the unit.
6. Rotate fan wheels manually.
Wheels should move freely and
be in proper alignment. Visually
inspect the fan area for obstru-
tions or shipping damage.
7. Remove all applicable knock-
outs for coil piping and
electrical connections.
See
Figures 6 thru 14
Figure 3: Vertical unit ventilator as shipped.
Figure 5: Shipping skid
removal
Figure 4: Horizontal unit ventilator as
shipped.