Trane UV-SVN02B-EN, Установка, эксплуатация и обслуживание, Страница: 6 / 52

General Information
6 UV-SVN002-EN
Modulating Water Valves (Option)
The modulating control valve option
provides optimum control of hot and
chilled water flow in various heating
and cooling applications. They are
designed to provide sinusoidal valve
actuator travel and operate silently,
resisting water hammer.
The actuator on the valve is a 24V, 3-
point floating type. See Table 3 for more
technical data.
Isolation Valves (Option)
The isolation valves are two position
24V, spring return type. They provide
added control in heating and cooling
applications when used in conjunction
with the face and bypass damper.
On heating coils and two-pipe change-
over applications, the valve is a normal-
ly open type to prevent the coil from
freezing in case of power loss.
For cooling, the valve is normally
closed and opens when there is a call
for cooling. See Table 4, for more tech-
nical data.
Power Supply 24V - 50/60 Hz
Power Consumption 4W
Maximum Duty Cycle 15%
Nominal Timing 120 sec.
Operating Ambient
Temperature 0 to 65 C
32 to 150 F
Min./Max Fluid
Temperatures 1 to 95 C
34 to 203 F
Operating Pressure
Differential
Max. - 4 bar (60 psi)
Pressure Rating
Static- 20 bar (300psi)
Burst- 100 bar
(1500 psi)
Flow Characteristics Linear
Power Supply 24V - 50/60 Hz
Power Consumption 5W
Max. Fluid Temp. 200 F/ 94 C
Min. Fluid Temp. 34 F / 1 C
Max. Operating
Pressure
300 psi
Max. Close-off
Pressure
1/2” = 30 psi
3/4” = 20 psi
1” = 15 psi
Table 3: Technical Data for
Modulating Water Valves
Table 4: Technical Data for Isolation
Water Valves