Trane UHAA-02, Установка, эксплуатация и обслуживание

Страница: 10 / 16

10 UHAA-IOM-1E
Wiring Schematics
1. Bring service leads in through knockouts "K" (Figures 2 and 3) on top or bottom of wall box for
flush-mounting the heater. Bring service leads in through bottom knockouts "K" only for
surface-mounting the heater. When bringing wiring in from the bottom, install wires through
cover "G" by removing screw "H".
2. Connect service leads to two black leads on 208V/240V models; connect to black and white leads
on 120V/277V models. Connect ground lead to green wire with approved connectors.
3. Attach wiring compartment cover "D" to heater assembly with screw "C". Refer to Figure 2 and 3.
Junction box volume = 52 CI (1321 mm)
Wiring Schematics
Figure 4. Standard UHAA Unit
Table 1. UHAA Unit Electrical Data
Model
Number
Watts Btu/Hr. Output
UHAA-15 1,500 5,119
UHAA-02 2,000 6,825
UHAA-03 3,000 10,250
UHAA-04 4,000 13,650
UHAA-48 4800 16,380