Trane TSC060ED, Инструкция по установке, эксплуатации и обслуживанию

Страница: 10 / 44

10 RT-SVX37B-EN
Pre-Installation
Precautionary Measures
• Avoid breathing fiberglass dust.
• Use a NIOSH approved dust/mist respirator.
• Avoid contact with the skin or eyes. Wear long-sleeved,
loose-fitting clothing, gloves, and eye protection.
• Wash clothes separately from other clothing: rinse
washer thoroughly.
• Operations such as sawing, blowing, tear-out, and
spraying may generate fiber concentrations requiring
additional respiratory protection. Use the appropriate
NIOSH approved respiration in these situations.
First Aid Measures
Eye Contact - Flush eyes with water to remove dust. If
symptoms persist, seek medical attention.
Skin Contact - Wash affected areas gently with soap and
warm water after handling.
Heater Inspection
Remove power to the unit and gain access to the electric
heat elements by removing the horizontal supply cover.
Visually inspect the heater elements for the following.
• Elements that are no longer secured to the white
ceramic insulator.
• Elements touching each other or touching metal.
• Severely kinked, drooping, or broken elements.
If an element has detached from its ceramic insulator,
carefully put it back into place.
Replace the heater elements if they present symptoms
noted in item 2 or 3 above.
WARNING
Fiberglass Wool!
Product contains fiberglass wool. Disturbing the
insulation in this product during installation,
maintenance or repair will expose you to airborne
particles of glass wool fibers and ceramic fibers known
to the state of California to cause cancer through
inhalation. Glass wool fibers may also cause
respiratory, skin or eye irritation.
WARNING
Hazardous Voltage!
Disconnect all electric power, including remote
disconnects before servicing. Follow proper lockout/
tagout procedures to ensure the power can not be
inadvertently energized. Failure to disconnect power
before servicing could result in death or serious injury.