
TK 56917-11-MM-EN
31
Figure 13.
Inverter Removal Shown
RCS1211-1
Inverter Installation
1. Reinstall inverter in reverse order of removal.
•
Tighten the four (4) 10-32 screws securing the inverter to the base plate to 31 in-lb. (3.5 Nm).
•
Reattach the 12 Vdc positive (+) and 12 Vdc negative (-) cables onto the DC inverter connections. Tighten hardware
to 108–120 in-lb. (12–13.5 N•m).
•
Tighten the 12 AWG ground wire to the inverter chassis securely.
Inverter Mode Settings
After replacing the power inverter, the Inverter Mode Settings must be reset. See