AMS-SVX02A-EN
21
Electrical Control Wiring
The first indoor unit
To the outdoor unit
The second indoor unit
The third indoor unit
Connection of Power Wire
Attention All indoor units are powered in the same way.
Air conditioning unit using single phase power
Remove the electrical appliance box cover.
1.
Power wire passes through the rubber ring.
2.
Connect power wire with terminal
Đ
L
đ
and
Đ
N
đ
and the earthing screw.
3.
Tie and fi x the cable with cable tie.
4.
Connection of Wired Controller Signal Wire
Remove the electrical appliance box cover.
1.
Wired controller signal wire passes through the rubber ring.
2.
Insert the wired controller signal wire into 4-pin socket of indoor unit circuit board.
3.
Tie and fi x the wired controller signal wire with cable tie.
4.
Attention
Please pay close attention to followings during wiring, avoiding the unit failure due to
electromagnetic interference.
Do not mix the wired controller signal wire and wiring (communication) with power wire
1.
and indoor and outdoor connecting wire.
Wired controller signal wire and wiring (communication) must use 2-core shielded wire in a
2.
strong electromagnetic interference place.
Electrical Parameters
Model
Frequency
(Hz)
Rated
voltage
DŽ
V
Dž
Voltage
range
(V)
Fan motor
rated current
FLA
(A)
Minimum
line current
(A)
Minimum
copper core
diameter
DŽ
mm
2
Dž
MW(C)C518
50
220~240
198~264
0.30
0.40
1.5
MW(C)C524
0.38
0.50
1.5
