Trane MCW509AMUA0, Руководство пользователя

Страница: 12 / 23

12
The air conditioner operates with the settings of
your choice.
From the next time on, the air conditioner will
operate with the same settings.
Press
MODE
and select a mode.
●
Each pressing of the button advances the
mode setting in sequence.
Press
ON/OFF
.
Then
OPERATION
lamp lights up.
■ ■ ■ ■ ■
To stop:
Press
ON/OFF
once again.
Then OPERATION lamp goes off.
■ ■ ■ ■ ■
To change the temperature setting:
●
At smaller air flow rates, the cooling
effect is also smaller.
DRY • COOL • FAN
Operation
1
2
COOL mode
Press
( )
to raise the temperature and
press
( )
to lower the temperature.
Set to the temperature you like.
DRY or FAN mode
The temperature
setting is not
variable.
■ ■
■ ■
■
To change the air flow rate setting:
COOLmode
Five levels of air flow rate setting
from “ ” to “ ”plus “ ” are
available.
DRY or FAN mode
The air flow rate
setting is not
variable.
Press
FAN
.
ON
OFF
■ ■
■ ■
■
To change the air flow direction:
(See page 12.)
Adjusting the Air
Flow Direction
You can adjust the air flow direction to
increase your comfort.
Adjusting the horizontal
blade (flap)
To stop the flap at an
angle you like, press
SWING
.
●
When
SWING
is selected, the flap swinging
range depends on the operation mode. (See
the figure.)
●
The real flap angles are differ from the
display of remote controller.
Press
SWING
.
●
Every time the button is pressed, “ ”
appears or disappears.
.......
The flap automatically
swings up and down.
ATTENTION
●
Always use a remote controller to adjust
the flap angle. If you attempt to move it
forcibly with hand when it is swinging,
the mechanism may be broken.
Notes on flap angles
In FAN mode or COOL mode
When stop operation
Upper limit in cooling
Lower limit in cooling
0˚
25˚
DRY • COOL
FAN
<MCW509AMUA0 • MCW512AMUA0>
<MCW518AMUA0 • MCW524AMUA0>
Display
Display
01̲EN̲3P102561-6F.p65
03/06/04, 9:23 Page 12
Adobe PageMaker 6.5J/Win