2
About the Manual
Literature Change History
CG-SVN02A-EN March 2003
Original Kit Installation manual for mounting and wiring the
Remote Human Interface Panel.
Overview of Manual
Note: One copy of this document ships inside each
remote human interface kit and is customer
property. It must be retained by the unit’s
maintenance personnel.
This booklet describes proper installation procedures for the
Remote Human Interface panel. By carefully reviewing the
information within this manual and following the instruc-
tions, the risk of improper operation and/or component
damage will be minimized.
Step-by-step instructions for programming and/or viewing
the; SETUP information, DEFAULT setpoints, DIAGNOSTIC
system failures, and checking OPERATING status are given
in the latest edition of the appropriate Programming,
Troubleshooting Guide that shipped with the unit.
Should equipment failure occur, contact a qualified service
organization with qualified, experienced HVAC technicians
to properly diagnose and repair this equipment.
Note: The procedures discussed in this manual
should only be performed by qualified, experienced
HVAC technicians.
Table of Contents
About the Manual
Literature Change History ................................................ 2
Overview of Manual ......................................................... 2
General Information
Unit Description ................................................................ 3
Installation
Mounting Location Recommendations ............................ 4
Mounting the Remote Human Interface Panel ................ 4
Field Installed Power Wiring ............................................ 5
Controls using 24 VAC ..................................................... 5
Controls using DC Communication Links ........................ 6
Multiple Unit Operation .................................................... 7
Final Unit Setup ............................................................... 7
