Trane GMND-SVX01B-EN, Инструкция по установке, эксплуатации и обслуживанию

Страница: 30 / 41

Start-Up
30 GMND-SVX01B-EN
Gas Equipment Start-Up
Customer _____________________________________________ Job Name & Number _________________________
Pre-Inspection Information with Power and Gas Off
Type of Equip: Duct Furnace
Serial Number: _________________________ Model Number: _____________________________
Name Plate Voltage: ____________________ Name Plate Amperage: ______________________
Type of Gas: Natural LP Tank Capacity: _______ lb Rating: _______ Btu @ ____ °F
_______ kg ________ kW @ ____ °C

Are all panels, doors, vent caps in place?

Has the unit suffered any external damage? Damage ______________________________

Does the gas piping and electric wiring appear to be installed in a professional manner?

Has the gas and electric been inspected by the local authority having jurisdiction?

Is the gas supply properly sized for the equipment?

Were the installation instructions followed when the equipment was installed?

Have all field installed controls been installed?

Do you understand all the controls on this equipment? If not, contact your wholesaler or rep. (DO NOT START
this equipment unless you fully understand the controls.)
Remarks: _____________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
GENERAL
With power and gas off.

Make certain all packing has been removed.

Tighten all electrical terminals and connections.

Check all fans and blowers for free movement.

Check all controls for proper settings.

Check all set screws on blowers and bearings.

Check belt tightness.
BLOWER
With power on and gas off.

Check voltage L1 _____ L2 _____ L3 _____

Check rotation of main .

Check motor amps L1 _____ L2 _____ L3 _____

Blower RPM _____________

Check air filters. (Record quantity & size.)
GAS HEATING
With power and gas on.

Inlet gas pressure. ____ in. wc or ____ kPa

Pilot and main burner ignition.

Manifold gas pressure. ____ in. wc or ____ kPa

Cycle firestat and/or freezestat.

Check electronic modulation. Set at: __________

Cycle and check all other controls not listed.

Check operation of remote panel.

Entering air temp. _____ °F or ____ °C

Discharge air temp. (high fire) ____ °F. or ____ °C

External static pressure _________ in. wc