CLCH-SVN05C-EN
5
Introduction
Overview of Manual
Performance Climate Changer™ air handlers may be
mounted on the roof with a roof curb or pier mount. This
manual includes the assembly instructions. Before
proceeding with the installation, refer to the unit submittal
drawings and unit tagging for correct placement of air
handler sections. Failure to review the submittal drawings
could result in performance or assembly problems. If there
are any discrepancies, contact your local Trane sales
engineer before proceeding. Carefully review the
procedures discussed in this manual to minimize
installation and startup difficulties.
Nameplate
Each air handler section includes at least one nameplate/
label, which identifies the type of section and functional
components, customer tagging information, the unit
serial number, the unit order number, the build section
position for installation, and the unit model number. Refer
to this information when ordering replacement parts or
requesting service.
Note:
The unit serial number and order number is
required when ordering parts or requesting service
for a Trane air handler.
Figure 1.
Performance air handler section nameplate
Agency listings and/or
agency certifications
Trane order number
Unit level serial number
Service model number
Unit tagging
Section location
Functional section type
Notes and additional
section information
