Trane CDHF Скачать руководство пользователя страница 67

Страница: 67 / 82

CTV-PRB004-EN

Starter Options

When the SMP option is selected, the medium voltage starter must be remote.

Note:

Additional “top hat” provisions may need to be field-supplied to allow for shielded cable

with stress cones (field-provided).

DMP, Differential Motor Protection (selectable with the SMP option).

DMP replaces the

zero-sequence ground fault protection. Instead, it uses a flux-summation, self-compensating
differential protection scheme for a quicker and more precise removal of line power during a fault
(see

“Differential motor protection,” p. 75

Note:

DMP is available only for 1,062 kW and larger motor sizes up to 5,000 volts.

Implications of the Enhanced Electrical Protection Package and SMP option on
customer-supplied starters (SBO).

Most of the accommodations that would need to be met by

the customer who wishes to use a non-Trane starter are provided with the Enhanced Electrical
Protection Package and the SMP option.

Note:

Trane-supplied starters already include these items.

The supplemental motor-protection enclosure will include:

•

Primary, single-stage current transformer in lieu of primary and secondary CTs

The oversized control panel will include:

•

Second-stage PTs, 115 to 30 volts, for medium-voltage applications only

•

Three-pole disconnect

•

Industrial terminal block for field control and control-power connections

Figure 47. Supplemental motor protection enclosure with DMP option

Lightning arrestors

2. Surge capacitors

3. SEPAM module

(Square D Electrical Protection and Metering)

CTV-PRB004.book Page 67 Sunday, December 18, 2011 6:39 PM

Содержание CDHF



















































































Результаты поиска

Содержание CDHF

Отзывы:

Похожие инструкции для CDHF

Бренды по названию

Популярные бренды

Trane CDHF, Инженерный бюллетень

Результаты поиска

Содержание CDHF

Отзывы:

Похожие инструкции для CDHF

Бренды по названию

Популярные бренды