CTV-PRB004-EN
23
Low-Voltage Starter Types
Features
•
Unit- and floor-mounted models are available
•
Control-power transformer
•
Starting current is factory set and field adjustable
•
Starting torque is factory set and adjustable via a voltage “notch” setting
•
Six-SCR power section
•
Air-cooled design with bypass contactor eliminates need for a water-cooling circuit, pump, and
heat exchanger
•
Bypass contactor rated to carry 100 percent of the full-load motor phase current
•
Protection from shorted SCRs and high starter heatsink temperature
•
Protection from transient voltage through resistor-capacitor (RC) snubbers across SCRs and
metal oxide varistors (MOVs)
•
Padlock tab for additional locking of starter door
•
Line-side connection terminal block/main lug only
•
UL and CUL certified
Dimensions
Typical dimensions for unit- or remote-mounted solid-state starters are shown in
Figure 15
. Always
consult the submittal drawings for as-built dimensions.
Figure 15. Solid-state dimensions
60"
13.5"
38.5"
CTV-PRB004.book Page 23 Sunday, December 18, 2011 6:39 PM