Trane AFDH, Руководство по установке

Страница: 40 / 68

40 AFDH-SVN01A-EN
Installation
Mechanical removal of the existing remote-mounted starter

WARNING
Heavy Objects!
Only attach cables (chains or slings) to the designated lifting points. Each of the cables (chains
or slings) used to lift the unit must be capable of supporting the entire weight of the unit. Lifting
cables (chains or slings) may not be of the same length. Adjust as necessary for even unit lift.
Other lifting arrangements could cause equipment or property-only damage. Failure to properly
lift unit could result in death or serious injury.

WARNING
Improper Unit Lift!
Most remote-mounted starter designs tend to be top heavy. Test lift unit to an approximate
height of no greater than 24 inches to verify proper center of gravity lift point. To avoid dropping
the unit, reposition lifting point if unit is not level. Failure to properly lift unit could result in
death or serious injury or possible equipment or property only damage.
Note: Due to the number of starter model types that can exist, the possible remote-mounting
configurations (i.e. wall mounted, stand mounted, floor mounted, etc.) and the number of
possible variations of each mounting configuration, it is not possible to provide specific
detailed instructions for the correct mechanical removal of any one particular type of
remote-starter. For each facility that has a remote-mounted starter to remove, it is the
responsibility of the technicians assigned to perform this task to determine the tools and
equipment needed, and to identify the correct procedures to follow to safely remove the
starter.
Mechanical installation of a Unit-Mounted AFDH drive

WARNING
Heavy Objects!
Only attach cables (chains or slings) to the designated lifting points. Each of the cables (chains
or slings) used to lift the unit must be capable of supporting the entire weight of the unit. Lifting
cables (chains or slings) may not be of the same length. Adjust as necessary for even unit lift.
Other lifting arrangements could cause equipment or property-only damage. Failure to properly
lift unit could result in death or serious injury.

WARNING
Improper Unit Lift!
A unit-mounted AFDH cabinet assembly is top heavy. Test lift unit to an approximate height of
no greater than 24 inches to verify proper center of gravity lift point. To avoid dropping the unit,
reposition lifting point if unit is not level. Failure to properly lift unit could result in death or
serious injury or possible equipment or property only damage.
NOTICE:
Improper Unit Lowering!
Do not drop the drive cabinet assembly onto the evaporator mounting brackets when setting it
into position! Dropping the cabinet onto the brackets could result in damage to the drive
cabinet, the brackets, and/or the evaporator shell.