Trane ACYSTAT110AA, Инструкция для владельца и по установке

Страница: 7 / 34

ACYSTAT-IOM-EN
7
Display Unit and Receiver Board
LCD Wired Control
LCD Wired Control
Name and function of buttons
1. Infrared Signal Receiver
Receives the signal from handheld remote control and
transmits the signal to indoor unit.
2. POWER Button
Press this button to start unit operation.
Press this button again to stop unit operation.
3. Temperature Setting Button
TEMP : Press this button to increase the set
temperature.
TEMP : Press this button to decrease the set
temperature.
4. MENU Button
Press this button to select modes or functions in the
menu.
5. MODE Button
Press this button to select system operation mode.
In cooling only system, a mode is selected in sequence
as FAN, COOL, DRY, and back to FAN. In cooling and
heating system, a mode is selected in sequence as
FAN, COOL, DRY, HEAT, AUTO, and back to FAN.
6. FAN SPEED Button
Press this button to select fan speed.
1. CLOCK
Displays present time.
2. ON TIMER
Displays ON TIMER when ON TIMER is set.
3. OFF TIMER
Displays OFF TIMER when OFF TIMER is set.
4. SLEEP Mode
Displays sleep symbol after activating SLEEP mode.
5. Room & Set Temperature
- Displays the room temperature. When FAN or TURBO
mode is selected, the room temperature will be
disappeared until FAN or TURBO mode is cancelled
or complete.
- Displays the set temperature (15 O C to 30 O C) when
either or button is pressed.
6. FAN Speed
Displays the selected fan speed level: auto, low,
medium, or high.
7. Operation Mode
Displays the current operation mode: FAN, COOL, or
DRY in cooling only system; FAN, COOL, DRY, HEAT,
or AUTO in cooling and heating systems.
8. ECONO Mode
Displays “ECONO” when ECONO mode is activated.
9. TURBO Mode
Displays “TURBO” when TURBO mode is activated.
10. Compressor/Valve Status Indicator
Displays compressor/valve status.
Indicators on LCD Wired Control