Trane ACYSTAT110AA, Инструкция для владельца и по установке

Страница: 14 / 34

14
ACYSTAT-IOM-EN
Note:
• The status display will not show fan speed and set
temperature.
• Fan speed and set temperature can not be changed
while POWERCOOL mode is selected.
• In case of power failure or changing operation mode,
POWERCOOL mode will be automatically cancelled.
SLEEP Mode (Available when using with remote
control)
SLEEP mode automatically and gradually adjusts room
temperature to provide great comfort during your rest.
Cooling
- Press SLEEP button in remote control to select
SLEEP mode.
- will be shown on the status display when SLEED
mode is selected
- After one hour operation of SLEEP mode, the unit will
automatically raise set temperature by 0.5 O C.
- After one and half hour operation of SLEEP mode, the
unit will automatically raise set temperature by 0.5 O C
again.
- After one and half hour operation of SLEEP mode,
the unit will automatically reduce set temperature
by 0.5 O C again.
- To cancel SLEEP mode, press SLEEP button in remote
control again.
Note:
• Set temperature shown on the display still show the
setting without 1
O
C added/reduced but it will plus/
minus 1 O C in the memory.
• In case of power failure or changing operation mode,
SLEEP mode will be automatically cancelled.
ECONO Mode (Available when using with
remote control)
ECONO mode drastically saves energy with high efficient
cooling capacity in COOL mode by reducing power
consumption. With this simply mode, the user can easily
get energy saving and comfort.
- Press ECONO button in remote control to select
ECONO mode.
- will be shown on the status display when ECONO
mode is selected.
- The air-conditioner will operates at low fan speed
and raise temperature by 1
O
C from set temperature.
- To cancel ECONO mode, press ECONO button in
remote control again.
Display Unit and Receiver Board
Touch Wired Control
- To cancel SLEEP mode, press SLEEP button in remote
control again.
Heating
- Press SLEEP button in remote control to select
SLEEP mode.
- will be shown on the status display when SLEEP
mode is selected.
- After one hour operation of SLEEP mode, the unit
will automatically reduce set temperature by 0.5 O C.