12
Remote Control Operation
MS-SVU42A-EN
1. After powered on, press ON/OFF button, the unit will start to run.(Note: When
it is powered o
ff
, the guide louver of main unit will close automatically.)
2. Press MODE button, select desired running mode, or press COOL or HEAT
mode to enter into the corresponding operation directly.
3. Pror - button, to set the desired temperature (It is unnecessary
to
set the temp. at AUTO mode.)
4. Pressing FAN button, set fan speed, can select AUTO FAN, LOW, MID
and HIGH.
5. Pressing
button, to select the swing.
1. Press SLEEP button to
enter
sleep
mode
.
2. Press TIMER ON and TIMER OFF button
to
set the scheduled timer
for
3. Press LIGHT button to
turn the display
on and off
.
4. Press TURBO button
to activate the turbo mode.
operation
.
Guide for operation- general operation
Guide for operation- Optional operation
ƾ
This function allows removal of moisture on the evaporator of the indoor unit after the unit has
stopped in order to prevent mold.When the blow function is activated, the indoor fan will
1. Having set blow function on: After turning off the unit by pressing ON/OFF button
indoor fan will continue running for about 10 min. at low speed. In this period,
press blow button to stop indoor fan directly.
2. Having set
blow
function off: After turning off the unit by pressing ON/OFF button,
the complete unit will be off directly.
Introduction for special function
When AUTO RUN mode is selected, the setting temperature will not be displayed on the
LCD, the unit will be in accordance with the room temp. automatically to select the suitable
running method and to make ambient comfortable.
ƾ
About AUTO RUN
About blow function
continue to run for 10 minutes after the unit is turned off by pressing the ON/OFF button.
