TEF 9964
XENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL
INSTALLATION INSTRUCTIONS
The floodlight should be installed according to the
calculated light distribution plan.
1.
The glass in front should
face the centre at the
helideck, unless stated
otherwise.
2.
Secure the floodlight to
the helideck by means
of four M10 bolts.
3.
Open the enclosure cover
on rear. Replace cable
gland gaskets as
required to match the cable
diameter. Unused cable
glands should always
be replaced with a blind plug.
4.
Connect cables and
replace the enclosure cover.
DIMENSIONS
5.
Luminaire housing shall be connected to earth potential by groundwire of min. crossection 2,5mm² / 14AWG
996A106032
