ITEM
DESCRIPTION
QUANTITY
AA
M6X12 SCREW
8
BB
M6X12 SCREW
6
CC
M4X12 SCREW
4
DD
M5X10 SCREW
2
EE
M6 NUT
3
FF
M5 NUT
2
GG
COTTER PIN
2
HH
METALLIC WASHER
13
II
INSULATING WASHER
13
JJ
CAP NUT
1
ADDITIONAL ITEM
DESCRIPTION
QUANTITY
CROSS HEAD
SCREWDRIVER 6X150mm
1
3.6.2. Assembly instructions:
Follow all instructions in this manual for the correct grill assembly
procedure.
To quickly assemble your grill, please follow the instructions below:
• Remove all parts from the packaging and carefully display all items on a level
surfac(separate small and large parts).
• Check if all listed parts are in the packaging. In order to do so please refer to the
part list.
• Follow the assembly steps indicated in this manual.
• Install all attachment components (screws, nuts, etc.) as shown in the pictures.
• Be careful when assembling your grill since it has many parts and these may have
sharp edges or corners.
• Remove all adhesive tape or protective film from the grill parts. Use a soft cloth
with alcohol to wipe the glue residue.
• This is a two-person job.
BB
HH
II
8
STEP 3
Attach the bowl (item 8) to the legs using M6x12 screws (item BB), metallic
washers, and ceramic washers (items HH and II), as shown in picture 39.
(The ceramic washer must be between the bowl and the metallic washer).
STEP 4
Attach the handle to the bowl (item 9) using M6x12 screws (item AA), metallic
washers, and insulating washer (items HH and II), as shown in picture 40.
(The ceramic washer must be between the bowl and the metallic washer).
GG
15
17
16
CC
CC
13
12
11
AA
15
STEP 2
Attach the wheels (item 16) to the axis of the metallic grate (item 15) using the cotter
pins (item GG) and then attach the wheel caps (item 17), as shown in picture 38.
STEP 1
Attach the front leg (item 11) to the lower metallic grate (item 15) using an M6x12
screw(item AA) and attach the left leg (item 12) and the right leg (item 13) to the
lower metallic grate using M4x12 screws (item CC), as shown in picture 37.
Picture 37
Picture 39
Picture 38
AA
HH
II
9
Picture 40
14