→
We now have a fresh Remix Deck. On the TRAKTOR software, you'll notice that the name
is "New Remix Set."
3.6.2
Loading Some Samples
For the purposes of this tutorial, we will limit our choice of Samples to the ones that are al-
ready in your Collection as a result of loading, playing, and repairing the "Remix Deck Tutorial"
as described in the previous section.
It is important to remember that all the manipulation you do to the Samples in a Remix
Deck (reverse, looping/one-shot, pitch and speed change, size change, and so on) are only
saved to the Remix Set. The Samples themselves are unaffected. This means that you can
have many different Remix Sets using the same Samples, but playing them back at differ-
ent speeds or pitches, and so on. The Remix Set itself takes up very little space on your
hard drive. It essentially recalls the states of each Sample loaded into it.
Automatic Loading
You have two ways of loading Samples with the F1. Let's try the automatic method first:
1.
Push the encoder knob and the Sample will automatically load into the top left cell; the
pad on the F1 will be dimly lit to show you that the cell is loaded. If this cell is already
loaded, the next available cell will be loaded with the Sample.
2.
Exit Browse mode by pushing the BROWSE (MIDI) button again.
3.
Hit the pad that you just loaded and you should hear the Kick playing.
►
Press and hold the SHIFT button, and then press the first Mute (STOP) button from the
left to stop the Sample Slot and to reset the Sample start to its initial position.
Manual Loading
Many times you will want to load a Sample into a specific Cell:
1.
Go back into Browse mode by pushing the BROWSE (MIDI) button.
2.
Using the encoder knob, find and select the Sample "D1 Deep Verb Splash" in "All Sam-
ples."
Tutorials and Workflows
Making Your Own Remix Set
TRAKTOR KONTROL F1 - Manual - 45