Traktor KONTROL D2, Руководство пользователя

Страница: 141 / 165

HOTCUE mode
During playback, pressing in an inactive pad sets a cue point. The button lights up and the cue
point is automatically assigned to this pad. Pressing that pad again let jump back the playhead
to the cue point just defined.
LOOP mode
In Loop mode, pressing a pad instantly loops playback for the number of bars set as Loop
Mode Size in Preferences > Traktor Kontrol D2 > Loop Mode Sizes > Loop . These values are by
default:
• 1/8 Bar Loop
• 1/4 Bar Loop
• 1/2 Bar Loop
• 1 Bar Loop
The Loop functionality considers the global Quantize setting:
• If Quantize is active, TRAKTOR delays starting the loop until the next down-beat, making
sure looping keeps the track in sync.
• If Quantize is deactivated, looping starts precisely when you press the pad.
FREEZE and Slicer Mode
In Freeze mode, TRAKTOR takes the playhead position, adds the number of bars set as loop
size and splits this section of a track into eight equally sized slices. These are then mapped to
the pads. Press a pad to start playback from that slice.
While in Freeze mode, you can access Slicer mode. This is how Slicer mode is different from
Freeze mode:
• In Slicer mode, holding a pad will infinitely loop the corresponding slice.
• In Slicer mode, holding two pads will loop the range between the start of one pad and the
end of the second.
By pressing the Loop encoder while Freeze mode is this will enable the Slicer mode. The slices
in the display and pad color changes from blue to green.
Hardware Reference
The Deck
TRAKTOR KONTROL D2 - Manual - 141