3
• Quill and cutter should never be used as a
handhold.
• Keep hands and clothing away from all
moving parts.
• Do not use Twister Bits where ejected slug
might cause injury (slug ejected at end of cut).
• Be sure that all safety devices are properly
adjusted and in use. Also, adhere to all
operating instructions.
• Do not attach Rail Drill to live 3rd rail track.
18.
Non-Conforming Cutting Tools
The TRAK-STAR Model RB28 is designed
to use TRAK-STAR Twister Bits only. The use
of drilling tools having different shank styles is
not recommended as they may not tighten
securely in the TRAK-STAR arbor with risk of
accident or injury.
19.
Save These Instructions
20.
Read all instructions concerning the motor
in your HONDA Engine Operator’s manual.
1.
Read All Instructions
2.
Keep Work area clean
Cluttered area and benches invite injuries. Keep dirt
and chips from under Twister Bit area and drill shoe.
3.
Consider Work Area Environment
.
Keep work area well lit.
4.
Keep Children Away
Do not let visitors contact tool.
5.
Store Idle Tools
When not in use, tools should be stored in a dry, and
a high or locked-up place -- out of reach of children.
6.
Do Not Force Tool
It will do the job better and faster at the rate for which
it was intended.
7.
Use Right Tool
Do not force small tool or attachment to do the job
of a heavy duty tool.
Do not use tool for purpose not intended -- for example
do not use a circular saw for cutting tree limbs or logs.
8.
Dress Properly
Do not wear loose clothing or jewelry. They might
entangle with spinning chips or get caught in moving
parts. Rubber gloves and nonskid footwear are
recommended when working outdoors. Wear sturdy
leather gloves when working indoors.
14.
Remove Adjusting Keys and Wrenches
Form a habit of checking to see that keys and
wrenches are removed from tool before Starting drill
unit.
15
Stay Alert
Watch what you are doing. Use common sense.
Do Not operate tool when you are tired.
9.
Always Wear Safety Glasses or Goggles.
10.
Do Not Overreach
Keep proper footing and balance at all time.
11.
Secure Work
Clamp work securely using appropriate shoe size and
shape.
Tighten Clamp by using two hands with handle
placed in central position and tighten securely.
12.
Maintain Tools With Care
Keep tools sharp and clean for better and safer
performance.
Do not use dull or broken Twister cutters. Follow
instructions for lubricating and changing accessories.
Inspect gas line periodically and, if damaged, have
repaired by authorized service facility.
Keep handles dry, clean, and free from oil and
grease.
13.
Disconnect Tools
Disconnect spark plug wire from spark plug when not
in use, before servicing, and when changing
Twister Bits or accessories.
16.
Check Damaged Parts
Before further use of drill, a part that is dam-
aged should be carefully checked to determine
that it will operate properly and perform its
intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and
any other conditions that may affect its opera-
tion.
A part that is damaged should be properly
repaired or replaced by an authorized service
center unless otherwise indicated elsewhere in
this instruction manual.
(See last page for authorized Service Centers)
17.
Additional Safety Precautions
Important Safety Instructions
