Trainertec Electronic DT2200, Руководство по эксплуатации

Страница: 16 / 41

- 15 -
6.The receiver is still waterproof without the rubber
stopper in place. This does not affect performance.
7.You may remove the receiver and attach it to a collar
that you prefer to use instead that fits.
Setting Up Multi-Dog System
1. Match a Receiver Collar To add a receiver collar to your remote
dog training system, following the below steps. Only turn on 1
collar at a time to connect.
Step 1: Take out 1 unmatched receiver collar. Press and hold
“ON/OFF” button. After two “beep” sounds, release the
button, the receiver power is on. Green LED light should be
flashing frequently. This means the collar is disconnected
from the remote.
( Note: Never open 2 or more unmatched receivers at the same
time.)
Step 2 : Take out the transmitter that you want to match to the