Trainertec Electronic DT2200, Руководство по эксплуатации

Страница: 19 / 41

- 18 -
the remote to see if the test light comes on. This shows
that the collar is working. If you choose, you can also put
it on the lowest setting and test on the back of your
hand/arm for confirmation if you’re still unsure.
If the collar didn’t connect, please repeat the step3 to step 4. Try
to close to the collar from different direction and more close
.
If you just want to disconnect a collar follow ‘Cancel a matched
Receiver’ instructions.
2. Cancel a Matched Receiver
Follow the below steps one by
one to cancel the matched receiver:
Step 1: Pick up the matched receiver. Press and hold the “ON/OFF”
button. After two “beep” sounds, the receiver’s power is on.
The green LED will flash 1 time per 5 seconds.
Step 2 : Press and hold “ ” button on the transmitter until the
LCD display occurs then release, the transmitter power is
on.
Step 3 : Press and hold the “ ” button and “ ” button at the