4. Using the i-PAD NF1200-T
Simulated Rescue Preparation
1. Open the cover of the i-PAD NF1200-T
2. Press the ON/OFF button to turn the i-PAD NF1200-T ON
The i-PAD NF1200-T activates the following Indicators and Voice Prompt, in sequence:
• State LED:
turns solid blue
• Beeper:
emits a short continuous beep
• State LED:
turns solid green
• Voice prompt:
“Attach pads”
The voice prompt is played until the training instructor presses the PAD ON/OFF or any scenario
key (S1 to S8) button to simulate a rescue scenario. The training instructor must press the PAD
ON/OFF button only after the pads are attached to the manikin by the trainee.
Operator’s Manual Ver 1.30
15
The
n O
pen
1
2
Turn
ON
