www.TrailFX.com
Page
2
of
4
Rev 031618
INSTALLATION PROCEDURE
BUMPER IS HEAVY, ASSISTANCE IS HIGHLY RECOMMENDED TO AVOID POSSIBLE INJURY OR
DAMAGE TO THE VEHICLE.
Vehicle Preparation
1.
Disconnect the factory fog lamp connectors, zip tie harness to frame.
2.
Remove fasteners holding OEM bumper to chassis.
3.
Remove fastener holding hood release lever to OEM bumper.
4.
Remove OEM bumper assembly.
Bumper Installation
1.
Remove the fog light from the vehicle. Use the OEM screws and nut plates to fasten the fog light to the bumper
(Fig 1)
.
Fig
1
