www.TrailFX.com
Page
4
of
6
Rev 092215
Driver Side Installation Pictured
(Fig 9) Driver/Left center Bracket
Front
Front
(Fig 8) Driver/Left center location
Front
(Fig 10) Driver/Left rear location
Rear
(Fig 7) Driver side 2011-on model with factory
holes in pinch weld pictured.
IMPORTANT: 2009-2010 models without holes
in pinch weld will require drilling 1/4” holes
through pinch weld to attach driver side front
support bracket. Do complete installation of
sidebars first, level sidebar before drilling
holes for support bracket.
Models without threaded
insert using Bolt/Nut
Plate, use:
10mm x 35mm Hex Bolt
10mm Lock Washer
10mm Flat Washer
Models with threaded
insert use:
8mm x 30mm Hex Bolt
8mm Lock Washer
8mm Flat Washer
Models without threaded
insert using Bolt/Nut
Plate, use:
10mm x 35mm Hex Bolt
10mm Lock Washer
10mm Flat Washer
Models with threaded
insert use:
8mm x 30mm Hex Bolt
8mm Lock Washer
8mm Flat Washer
12mm Flat Washer
12mm Lock Washer
12mm Hex Nut
