www.TrailFX.com
Page
1
of
7
Rev 031318
PARTS LIST:
Qty
Part Description
Qty
Part Description
1
Driver/Left Sidebar
18
8mm-1.25 x 30 Hex Bolts
1
Passenger/Right Sidebar
24
8mm x 24mm x 2mm Flat Washers
1
Driver Front Mounting Bracket
12
8mm Lock Washers
1
Passenger Front Mounting Bracket
6
8mm Hex Nuts
2
Driver Center/Rear Mounting Brackets
6
8mm Nylon Lock Nuts
2
Passenger Center/Rear Mounting Brackets
12
8mm-1.25 x 25mm Combination Hex Bolts
3
Support Brackets (DS Front & PS Center/Rear)
12
6mm x 25mm Hex Bolts
3
Support Brackets (PS Front & DS Center/Rear)
24
6mm x 22mm x 2mm Flat Washers
6
8mm Nut/Bolt Plates
12
6mm Nylon Lock Nuts
6
8mm Plastic Retainers
5'' Oval Straight Side Bar
Part No. A7057S/B
Fits:
2010-Current
Dodge Ram 2500/3500 Mega Cab
Passenger/Right Rear and
Center Mounting Brackets
(6) 8mm Bolt x 8mm Nut Plates
Passenger/Right Front Support Bracket
Driver/Left Center and Rear
Mounting Brackets
Front
(6) Plastic Retainers
Driver/Left Front Support Bracket
Driver/Left Front
Mounting Bracket
Passenger/Right
Center and Rear
Support Brackets
Driver/Left Center
and Rear Support
Brackets
Passenger/Right
Front Bracket
Note front step
pad is closer to
front end of tube
ASSISTANCE IS RECOMMENDED.
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
DO NOT OVER
TORQUE
.
STANDARD OPERATING LOAD FOR TIGHTEN
BODY MOUNT NUTS & BOLTS VARIES FROM
45
TO
65
FOOT POUND.
60-180 min
1 866 638 4870
POLISHED STAINLESS STEEL
– LIMITED LIFETIME
POWDER COATED BLACK
– 3 YEARS
Cutting Not
Required
Drilling
Required
