3.
Bedliner Installation Steps
For Trucks without Cargo Management Rails
STEP 1
Place bedliner in truck box. While standing beside truck at
approximately the center of box area, lift side of bedliner up at a
450 angle so that the opposite side slips under the siderail of
pickup truck (See FIGURE 1). A second person may be required
to help slip the wall of the bedliner under the sidewall of the truck
box.
STEP 2
Stand at the rear of pickup (center) and lift the center of bedliner
floor up. Have a second person push bedliner wall under siderail
of the pickup truck (see Figure 2). Release bedliner floor. (Make
surefront rail of bedliner is completely over the front rail of truck
box.)
For Trucks with Cargo Management Rails
STEP 1A
Place bedliner in truck box. While standing at the rear of the
truck, lift the rear edge of the bedliner up at a 45 degree angle
so the front edge of the bedliner slides under the bottom edge
of the front cargo management rail. Lower bedliner floor once
front edge of bedliner is seated behind front cargo management
rail (see Figure 3).
STEP 2A
Stand at the rear of pickup (center) and lift the center of
bedliner floor up. Have a second person push bedliner wall
under cargo management rail of the pickup truck (see Figure
4). Repeat process to opposite side of bedliner. Release
bedliner floor.
Continue For All Trucks
STEP 3
Press the bedliner firmly against the truck body. Center a
selfdrilling screw in a pre-drilled hole in the bedliner. Fasten the
screw to the truck box wall with a power screwdriver (See
Figure 5).
DO NOT OVER TIGHTEN BECAUSE THE SCREW THREADS
CAN BE STRIPPED EASILY.
STEP 4
(For all trucks)
Repeat Step 3 to remaining hole location on
opposite side.
