8
Prior to installing the unit, thoroughly clean the windscreen, where the unit is to be located. Peel off the pro-
tective film of the double-sided adhesive tape (on the stand), and firmly attach it to the glass/windscreen, in
front of the rear-view mirror. Following attachment, release the stand fixing lever to adjust the unit so that it is
level with the ground/horizontal and then tighten the stand fixing lever.
* Regarding the location of the stand, please avoid any heating/aerial wires and/or coating (tinting)
areas at the top of the windscreen. If installed in the tinted area, the quality of recording may be ef-
fected and the heating/aerial wires may be damaged when the stand is removed.
* The above wiring diagram may vary depending on the type of vehicle.
Wiring Diagram
Detailed Procedure of Installation
- After installation, start the engine and the ON/GPS (POWER) LED will illuminate, which indicates
a correctly completed installation.
- If the ON/GPS (POWER) LED fails to illuminate, check the cable/power connections and remove
any dust/dirt from the cigarette power socket.
Once wiring and installation have been completed, check the following:
Содержание Recorder-Cam
Страница 28: ...INSTRUCTION MANUAL...
