Trailer Vision Recorder-Cam, Инструкция по эксплуатации

Страница: 12 / 28

12
- Only use the original SD card, otherwise data loss may occur.
- The SD card can be inserted regardless of the power On/Off status. As soon as it is inserted,
the unit will reset the internal software and then operate.
- To remove the SD card: turn off the vehicle engine and check that the GPS (POWER) LED
lights goes out (after not more than 20 sec.); now remove the SD card. If the SD card is
removed with power on, a warning sounds and recording may not be completed. Ad-
ditionally, it may cause image deletion, or permanent SD card failure.
Before using the SD card, check the following:
5
Open the SD card slot cover and
insert, as shown in the figure.
Push fully in, until the SD card
‘clicks’ into place.
Once the card has been com-
pletely inserted, close the cover.
An incorrectly inserted SD card may cause malfunctions, always fully insert the
card until it ‘clicks’ into place. Be careful not to allow your hands, or any impuri-
ties to touch the card terminals, as data loss may occur.
After removing the SD card,
close the cover.
Fully remove the SD card. Open the cover and gently press the
SD card, it will then come out.
Inserting the SD card
Removing the SD card
1 Channel, Vehicle, DIGITAL VIDEO RECORDER
Preparation for Operation