6
Knowing the proper techniques to operate your Trailer Valet can help keep you and
others around you safe. In this guide, you are shown the basic fundamentals for
effective operations. However, it is up to you to analyze the situation and make the
decisions necessary for the proper use of your Trailer Valet. Apply your knowledge of
your Trailer Valet and the basic fundamentals you have practiced to adjust your
techniques to each unique situation.
Step 4: TESTING THE ASSEMBLY
WARNING!
Always ensure the operator and bystanders are aware of load stability.
1) Lower the trailer gradually until the existing jack is above the ground and the trailer is
completely supported by the Trailer Valet.
NOTE:
Keeping the trailer jack close to the ground prevents serious damages from
occurring due to unexpected failures.
Step 5: ATTACHING DRIVER
Option 1: Manual Operation with the Drive Handle
1) Attach the Drive Handle to the low or
high
gear Driveshaft.
Option 2: Using the Drill Adapter
1) Using the chuck of your drill/driver, connect to the Drill Adapter
2) Secure the chuck of your drill around the Drill Adapter tightly to avoid the
Adapter slipping off the drill.
3) Align and insert the Drill Adapter to the low gear Driveshaft.
NOTE:
If you are using a cordless drill, be sure your battery pack is fully charged before
use. Follow your drill/driver manufacturer's recommendation.
WARNING!
DO NOT use your drill on the high gear.
Visit our website to see a video on how to use your drill attachment
to move your Trailer Valet.
Videos are available on the Trailer Valet
website if you need a visual guide to
install or use your Trailer Valet.
More information https://www.caravansplus.com.au
