9
Check
Before
First Use
Before
Each Use
Every 90
Days
Take the time to read and understand these operating
instructions in order to understand your Trailer Valet and
its operations.
Read and understand your drill/driver operator’s manual
and instructions.
Inspect the Trailer Valet for damage. Replace any
damaged parts immediately. If a part must be replaced,
contact Trailer Valet Customer Service.
If you plan to keep the device attached to the trailer after
each use, you must check the Locking Nut to ensure it
stays fastened tightly against the trailer tongue and that
the nut is flat against the coupler.
Keep the device free from contaminants. Remove any dirt
and debris from moving parts.
Apply multipurpose grease to the chain by removing the
front cover of the device.
Apply multipurpose grease to the gear bushings.
Additional Tips:
x
The Trailer Valet is made of high strength steel and given a powder coat finish made to resist
corrosion. However, if the device is used in a marine environment or where road salt is
encountered, rinse off the interior and exterior with fresh water and allow to dry. DO NOT
SUBMERGE THE TRAILER VALET as this can damage the gears and erode lubricants.
x
After each use, wipe exterior surfaces with a clean cloth.
More information https://www.caravansplus.com.au
