3
x
DO NOT use the Trailer Valet on slopes
and inclines beyond stated limits.
x
DO NOT attempt to use the Trailer Valet
to pull up (nose first) or to push down
(rear first) an incline. Always move along
an incline with the unit on the lower end
of the incline.
x
DO NOT submerge the Trailer Valet in
water (salt or fresh) or leave it in water
for prolonged periods, since this can
damage the gears and erode lubricants.
x
DO NOT use your drill on the Trailer
Valet’s high gear.
x
Carefully read all instructions. The
operator of the Trailer Valet must
exercise common sense, caution, and full
judgment when assessing situations not
covered or cautioned in this manual.
x
The Trailer Valet is designed for specific
applications only. Trailer Valet will not be
responsible for issues arising from
modifications made onto the device. Do
not modify the device or use the device
for any application other than its
intended purpose. Do not exceed the
designated weight limits.
x
Stay alert! Do not operate if you are tired.
Do not operate the device while under
the influence of drugs or alcohol. Read
prescription warning labels to determine
if the use of prescription drugs may
impair your ability to operate the device.
x
As with all devices with moving parts, do
not wear excessively loose clothing as it
may become caught, resulting in injury.
Tie back and secure long hair.
x
Have a second person guide your trailer’s
movements while using the Trailer Valet
to avoid property damage, especially in
narrow or poorly visible areas.
x
Operator and bystanders should never
place any part of the body under or in the
path of any portion of this product or the
load being supported or moved.
x
This product must be installed and used
in strict accordance with these
instructions.
x
Always remember to set the brakes
before leaving or if you are having
trouble maintaining control of the trailer.
x
Always read and understand your
drill/driver operator’s manual and
instructions.
x
Before each use of the Trailer Valet,
check for damaged parts. Carefully
inspect the device for any part that
appears to be damaged to determine if
the device will operate properly. Check
for alignment and secure mounting of all
moving parts. If the device is neither
aligned, secured, or both: DO NOT use
the device.
x
When servicing, use only factory
replacement parts.
x
This product is not intended to be used
as a transport device for the implement it
is attached to.
x
Have wheel blocks in place before/after
use and ready in case of emergency.
x
Never exceed the maximum rated
capacity. Refer to the operating manual
or decals on the product to obtain rated
capacity. If uncertain, contact Customer
Support at (844) 846-9344 or email:
[email protected].
x
The Trailer Valet is designed for vertical
loading. Excessive side forces may cause
failure and must be avoided.
x
The use of gloves is recommended while
attaching the device to the trailer.
x
The Trailer Valet is designed for use on
solid surfaces. DO NOT use the product
on excessively soft surfaces or muddy
terrain as the device will not be able to
gain traction. If there is no traction
despite being on a solid surface, consider
shifting more of the weight of your trailer
forward.
More information https://www.caravansplus.com.au
