Operating Your Speed Tracker
Operating Your Speed Tracker
After your Speed Tracker is mounted and powered, you can connect to and manage it remotely using
SafePace® Cloud.
For more information on operating your tracker with SafePace® Cloud, refer to the
Web Director User
Guide
.
T
IP
:
You can get the latest version of all manuals at:
http://www.trafficlogix.com/customerarea/customerdownloads.
Resetting the Speed Tracker
There is no ON/OFF switch supplied with the Speed Tracker. The tracker immediately powers on when the
power source is connected. There is also no reset button on the controller card included with this tracker. As
a result, we recommend that you use the following procedure to turn the tracker OFF and ON, or reset the
tracker.
To reset the Speed Tracker:
1.
Open the tracker enclosure.
On the inside of the rear panel you will see the rechargeable battery and connectors.
2.
Disconnect the two connectors. This turns the tracker off.
3.
Wait a couple of seconds then reconnect the connectors. The tracker will immediately power on.
W
ARNING
:
It is vitally important, whenever you close the tracker, that you close and lock
all
of the
latches properly to avoid water infiltration as this could damage the tracker and void your warranty.
Speed Tracker Installation Guide
p. 27
