Battery Power
Battery Power
Battery powered Speed Trackers come with a rechargeable lithium battery. Though they are shipped with
the tracker, typically, the batteries are not installed in the tracker. When you receive the tracker, you need
to remove the batteries from their packaging and install them in the tracker.
Charging the Speed Tracker Battery
We strongly recommend that you charge the battery fully before the initial use. The supplied battery
charger is equipped with a charge indicator which shows when the battery is fully charged and ready for use.
You do not have to remove the battery in order to charge it. You can simply connect the charger to the
Speed Tracker through its power connector port.
[Figure 7] Speed Tracker power connector, closed
[Figure 8] Speed Tracker power connector, open
To charge the batteries:
1.
Connect the charger to the power connector port of the Speed Tracker.
A
.
Unscrew and remove the cover from the power connector port.
B
.
Align the cable from the charger and insert it into the port.
C
.
Screw the cover on the charger cable over the joint. Be careful not to over tighten it.
2.
Plug the charger into the wall.
When the charger indicates that the battery is fully charged, the battery is ready for use.
Speed Tracker Installation Guide
p. 18