Wiring the Solar Panel to the Speed Tracker
To wire the solar panel to the Speed Tracker:
1.
Open the Speed Tracker then connect the battery connectors as shown in the following image.
2.
Close the Speed Tracker.
3.
Align the solar panel connector and the Speed Tracker power connectors, then insert the solar panel
connector into the Speed Tracker power connectors.
4.
Screw the cover on the solar panel connector over the joint. Be careful not to over tighten it.
W
ARNING
:
It is vitally important, whenever you close the Speed Tracker, that you close and lock
all
of
the latches properly to avoid water infiltration as this could damage the tracker and void your warranty.
Speed Tracker Installation Guide
p. 22